歡迎您，浏覽新港海岸（北京）科技有限公司官方網站！
服務熱線：+86-10-53821869 / +86-755-23480857
NCS8610
- 封裝 : WQFN-40(5mm x 5mm)
産品描述
The NCS8610 is an AC/DC-coupled input HDMI signal to TMDS/DVI/FRL redriver supporting DVI 1.0 and HDMI 1.4b, 2.0b and 2.1 output signals. The NCS8610 supports four TMDS/FRL channels and Digital Display Control (DDC) interfaces. The NCS8610 supports signaling rates up to 6 Gbps at HDMI 2.0b or 12 Gbps at HDMI 2.1. The NCS8610 can be configured to support the HDMI2.0 or HDMI 2.1 standard. The NCS8610 supports dual power supply rails of 1.1V/1.2V on VDD11 and 3.3V on VDD33 for power reduction. The NCS8610 also supports single power supply rail of 3.3V on VDD33 and embedded LDO of 1.1V/1.2V on VDD11 by package pin option for cost sensitive application. NCS8610 supports fixed receiver EQ gain using I2C or pin strap to compensate for different lengths input cable or board traces.
産品參數
• Support both AC-coupled and DC-coupled TMDS or DisplayPort input
• Data rate up to 12 Gbps, compatible with HDMI 2.0b and HDMI 2.1 FRL
• Support DisplayPort Mode via I2C control
• Programmable receiver data lane equalizer gains up to 16 dB
• Global or independent lane control on EQ, pre-emphasis/de-emphasis, output swing and slew rate
• Three source termination impedances selection
• TMDS output amplitude adjust using onchip resistor or off-chip resistor
• Full lane swap on main lanes
• Supports Hot Plug Detect
• Pin Strap or I2C control
• Low Power Consumption from 1.1V/1.2V and 3.3V dual power supply rail
• Integrated on-chip 1.1V/1.2V LDO for single 3.3V option
• Temperature range: -40ºC to 85ºC
相關産品
産品咨詢
北京總公司
北京市朝陽區望京綠地中心A座A區9層
電話：+86-10-53821869
深圳子公司
↵廣東省深圳市福田區深南大道6019号金潤大廈8層
電話：+86-755-23480857
西安分公司
西安市高新區錦業一路52号寶德雲谷國際B座2003
電話：+86-29-81128637
合肥子公司
↵合肥市高新區創新大道2800号創新産業園2期F棟705
電話：+86-551-63657380